Felhasználónév

Termékek

Újdonságok
Akció

DSM-48DT

Ár: 291 465 Ft bruttó

Válasszon képet:

Convenient audio management within a network ...
Due to the Dante® interface, it is possible to conveniently integrate the speaker management system DSM-48DT as a 2-channel receiver into a Dante® audio network. Both of the Dante® signals are available for the input channels IN3 and IN4, alternatively to the analogue inputs and the digital input. Thus, the DSM-48DT allows you to receive one stereo audio signal or two mono audio signals from other Dante®-enabled devices which are located in the same subnetwork and to process this/these in the same way as an analogue signal or AES/EBU signal.
Speaker management systems featuring analogue inputs as well as outputs and additionally provide a Dante® interface are called Breakout Boxes. In order to use the DSM-48DT as a receiver unit, it has to be connected to at least one Fast Ethernet switch (100 Mbps Ethernet).
Digital speaker management system,
with Dante® module.
  • 4 analogue inputs and 8 analogue outputs (XLR, balanced)
  • AES/EBU digital input, stereo
  • 2 Dante® channels
  • 64-bit DSP, sampling rate: 96 kHz
  • Dynamic range: > 118 dB
  • Latency: 0.64 ms
  • Routing via fader for user-defined routing of the inputs to the outputs
  • Audio transmission over Ethernet via Dante® protocol
  • Graphical user interface, PC editing software (devices will be identified automatically)
  • 80 user presets can be stored
  • Remote control via USB or TCP/IP LAN
  • Dot matrix display with 2 x 16 characters
  • VU meter with 4 LEDs for each channel, level display and peak
  • 482 mm (19") rack installation, 1 RS
Input (data for each channel)
  • Gain control: -48 dB to +12 dB
  • 10 parametric equalizers with 8 types of filters each
  • 2 crossover networks with Butterworth, Linkwitz-Riley and Bessel filters as well as individually created types of filters from 6 to 24 dB/oct
  • Delay to be switched between time (ms) and distance (m): 2,000 ms max. in steps of 10 µsec or 686 m max. in steps of 3.4 mm
  • Limiter, threshold: from -48 dBu to +24 dBu
  • Compressor, release time: 10 dB/s to 100 dB/s
  • Mute
Output (data for each channel)
  • Gain control: -48 dB to +12 dB
  • 10 parametric equalizers with 8 types of filters each
  • 2 crossover networks with Butterworth, Linkwitz-Riley and Bessel filters as well as individually created types of filters from 6 to 24 dB/oct
  • Delay to be switched between time (ms) and distance (m): 2,000 ms max. in steps of 10 µsec or 686 m max. in steps of 3.4 mm
  • Limiter, threshold: from -48 dBu to +24 dBu
  • Compressor, release time: 10 dB/s to 100 dB/s
  • Mute
  • Routing mix for level adjustments via routing fader
  • Selectable phase (invert, 180°)
Állítási tartomány -
Sávközép-frekvenciák -
Bemeneti érzékenység -
Bemeneti impedancia -
Kimeneti impedancia -
Kompresszióarány -
Gate ratio -
Keresztezési frekvencia -
Felüláteresztő szűrő -
Mélyvágás -
Áttétel -
Súly 2,3 kg
Küldés
CSATLAKOZZ!

CSATLAKOZZ!